Fabater 30A RV Power Inlet Outlet Shore Kit, 125V NEMA L5 30P L5 30R Twist Lock Male Female Connector with Boot Cord Protector for RVs Trailers Caravans

1. RV Power Plug Kit: The kit includes NEMA male connector, NEMA L5-30R female connector, and power cord protective cover with locking . 2. Versatile Use: This power inlet outlet shore kit features rated current of 30A, can be widely used in RVs, trailers, ships, caravans, and van. 3. PVC Cover: The locking plug and connector set adopts heavy duty PVC material, which is high temperature proof and Mystical/Fantasy retardant, ensuring safety. 4. Long Lasting: The ni plated brass rod on the plug is made of brass and plastic, which will not oxidize and can avoid damage caused by sun degradation. 5. Easy to Install: The color terminals make installation more convenient, the green terminal is for ground wire, black terminal is for live wire, and the white terminal is for neutral wire. Compatible with 10-8AWG wires. Specification: Item Type: RV Power Inlet Outlet Shore Kit Material: PVC, Brass Rated Current: 30A Plug Specification: NEMA L5-30R Socket Specification: NEMA Installation Steps: 1. Position Determination: Select a suitable location on the Cover, avoid any pipes or other obstacles, and ensure that all power tools are properly grounded. 2. Marking and Cutting: Use a hole saw to and cut holes with a diameter of 2-7/8in on the Cover. 3. Placement Inlet: Place the air inlet into the opening and use it as a model to the location of the installation hole, then use a 1/8in drill bit to drill the installation hole. 4. Remove the Rear Baffle: Remove the 2 screws at the front end of the air inlet and remove the rear baffle. Wiring Specifications: Peel off the 3/4 inch insulation layer from the wire end, ensure the wire cores are clean and non corrosive. If necessary, cut off the corrosive part and re strip the wire. Wiring Color Code: 1. 125V 3 Wire System: Black: Live wire; White: Neutral wire; Green: Equipment ground wire 2. 125/250V 4 Wire System: Black: Live wire (125V); Red: Live wire (125V); White: Neutral wire; Green: Equipment ground wire 3. Insert the wire into the terminal hole, tighten the terminal screw to a torsion of 20in-lb, and ensure that there is no insulation remains. Wiring: Thread the internal wiring through the box opening, use at least 10 AWG/3c wires, do not use finer wires to prevent overheating and potential electrical fires. Stripping and Connecting: Peel off 3/5in on the end of the wire to ensure it is clean and non corrosive. Insert the wire into the opening behind the air inlet according to the color code and tighten the terminal screw. Organizing and Fixing: Thread the wires through the rear baffle and pressure reducing device, slide the rear baffle behind the air inlet, tighten the pressure reducing screw, place the air inlet above the box opening, align the mounting holes, and use screws to fix the air inlet to the box. Adjustment Steps: 1. Power Outage: Cut off the power at the entrance of the circuit breaker. 2. Dismantling Old Inlet: Remove the old air inlet from the housing and disconnect the internal wiring. 3. Check for Erosion: Check for erosion in the wiring. If there is, cut off the corrosive part and re strip the wire. Package List: 1 x NEMA L5-30R Plug 1 x Plug Protective Cover 1 x User Manual 1 x NEMA Socket 1 x Socket Manual Notice: Precautions Before Installation: 1. Electrical : There is a of electric shock and fire during installation, ensure that connectors and cables are not connected to the power source. 2. Professional Advice: If unsure how to install, please consult a qualified electrician. Applicable Materials: Only suitable for copper wire. Cable Specifications: Use cables with specifications of 6AWG/4C or 6AWG/3C+8AWG/1C. Required Tools: Pencil, electric drill, 2-1/2in hole saw, 1/8in drill bit, flat head , wire stripping pliers/wire stripper, 8 stainless steel flat head screws (not provided).

• [Complete Kit] Includes NEMA male connector, NEMA L5-30R female connector, and power cord protective cover with locking for reliable shore power connection. This RV power inlet outlet shore kit ensures all components are included for immediate installation without missing parts, streamlining setup for RVs, caravans, and trailers while preventing cord damage from environmental exposure.
• [Versatile Compatibility] Designed for 30 amp RV power applications with 125V system support, compatible across RVs, trailers, ships, caravans, and . The shore power inlet handles diverse mobile environments, featuring NEMA L5-30 specifications that integrate seamlessly with standard electrical systems, ensuring universal usability without voltage mismatches or connection issues during travel or storage.
• [Durable Construction] Built with heavy duty PVC Cover that is high temperature proof and Mystical/Fantasy retardant for enhanced safety during operation. The ni plated brass rod resists oxidation and sun degradation, maintaining conductivity over time while the robust materials withstand harsh weather conditions, providing long term reliability for frequent RV power needs without frequent replacements.
• [Easy Installation Process] Color coded terminals simplify wiring: green for ground, black for live, and white for neutral wire, compatible with 10-8AWG wires. Clear installation steps guide positioning, cutting, and secure placement, reducing setup errors and saving time during initial use or maintenance for hassle free shore power integration on any vehicle.
• [Secure Wiring Protection] Features a boot cord protector with locking to connections from , dust, and physical strain. This RV power protector prevents accidental disconnections and wire fraying, ensuring stable electrical during movement while the enclosed design minimizes fire risks from exposed terminals, enhancing overall safety for all 30 amp shore power applications.