4 Stroke Small Outboard Motor 4 hp 1.6kw Inflatable Fishing Boat Engine with Air Cooling for Inflatable, Kayak, Dinghy, Canoe, Jon Boat Small Boat with 0.32Gal Fuel Tank

DetailsClamping Bolt: The fishing boat engine has a clamping bolt on the rod. It clamps the engine firmly on the boat. It is also very easy to install.Water Baffle: There is a water baffle above the propeller to prevent water from splashing onto the boat. So you don't have to worry about getting yourself wet with the splash.Anti-slip Throttle Handle: The throttle handle of this product is designed with an irregular shape, which is more non-slip, facilitating your daily use.Heat Dissipation Housing: There are many small holes in the engine's housing to help dissipate heat and prevent the engine from burning out after prolonged use. These heat dissipation holes extend the life of the engine.Three-Blade Plastisol Propeller: This bracket uses a three-blade propeller to replace the traditional manual boat propeller. This propeller has a fast speed and allows the boat to be driven quickly.ApplicationThe fishing boat engine is suitable for all kinds of small boats of 7.5-16.4ft, such as rubber boats, fishing boats, wooden boats, etc. You can use it for fishing on the river, water farming, river rescue, water excursions, flood relief, etc.SpecificationBracket: Material: Aluminium Rod, Plastisol Propeller Color: Black and Silver Drive Rod Length: 56cm/22.05inch Small Bracket Size: 19x8cm/7.48x 3.15inch Control Lever Length: 53cm/20.87inch Package Size: 94x19x 16cm/37.01x7.48x6.30inch Net Weight: 4.7kg/10.36lbs Gross Weight: 4.95kg/10.91lbsEngine: Color: Orange, Black, Silver Size: 26x22.5 x 29cm/10.24x8.86x11.42inch Engine Model: Four-stroke 144F Displacement: 53.2cc Air-cooling Mode: Forced Air-cooling Gasoline Volume: 1.2L /0.32gal Starting Method: Hand-pull Start Speed: 15km/h Steering: Handle Steering Fuel Consumption: 1-1.2 Hours/ One Tank of Gasoline Fuel Type: Gasoline Mounting Type: Engine Package Size:33.5x29.5x 23.5cm/13.2x11.6x9.2inch Net Weight: 5.8kg/12.8lbs Gross Weight: 6kg/13.2lbsSize After Installation: 26x53x113cm/10.24 x 20.87x44.49inchInstallation InstructionInstallation Warning: Most boats are approved for a maximum power rating, which is shown on the boat's nameplate. Do not configure your boat with an outboard that exceeds this limit.Installation position: The center of the boat's bottomOutboard installation instructions:1. Select the outboard engine with corresponding specification ( HP ) according to the size of the boat, and determine the shaft length of the boat engine by the height of the transom.2. After hanging the outboard on the transom, lock it with clamping bolts.3. After the outboard is fixed, you need to pay attention to the water level to be flooded to the best water level to ensure the cooling water pump cools the engine smoothly while making the outboard propulsion system play the best thrust performance.Package IncludedEngine Package: 1x Engine1x Measuring Cup1x Chinese InstructionOther Accessories for AssemblyBracket Package:1xDrive Rod1x Small Bracket1x Control Lever1x Big Wrench1x Metal Stick1x Screwdriver3x Small Wrenches4x Screws1x English InstructionNotes1. The four-stroke 4 HP fishing boat engine is suitable for all kinds of small boats of 7.5-16.4ft, such as rubber boats, fishing boats, wooden boats, etc.2. The built-in fuel tank can be filled once for about 2 hours at high speed, and the driving speed is about 10~15km/h. The driving distance is different due to different boat types and load water conditions.3. Four-stroke fuel uses gasoline over 92#. The oil should be added separately to the internal oil tank.4. Although this model hasn't a gear set, the throttle can be infinitely adjusted.5. Before using the new machine, you must first add four-stroke special oil. And, the oil is added to the oil volume cup 200ml. Too much or too little oil will seriously affect the engine.6. The new machine needs to change the oil once in 6 hours, and then change the oil once in 8 hours. 7. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• 【4HP 4-Stroke Powerful Performance】This 4-Stroke 4HP Outboard Motor delivers 15km/h speed, easily powering 7.5-16.4ft boats like inflatable fishing boats or kayaks. Its forced air-cooling system and heat dissipation holes prevent overheating, ensuring reliable use for fishing trips or water excursions.
• 【1.2L Fuel Tank & Long Runtime】Equipped with a 0.32gal built-in fuel tank, this engine runs up to 2 hours on a full tank—no frequent refueling. It uses ≥92# gasoline, saving time for all-day fishing, water farming, or river rescue missions.Suitable for canoes, kayaks, inflatable dinghies, and aluminum boats from7.5-16.4ft
• 【360° Steering & Infinite Speed Control】With a 360° adjustable control lever and non-slip throttle handle, this Outboard Fishing Boat Engine offers flexible maneuvering. The infinite speed adjustment lets you tailor speed to water conditions, perfect for precise navigation or trolling.
• 【Lightweight & Easy to Carry】Weighing only 12.8lbs (engine) + 10.36lbs (bracket), this Portable Outboard Motor is easy to transport and install. The clamping bolt secures it firmly to the boat, while the hand-pull start ensures hassle-free operation for beginners.The fishing boat engine is suitable for all kinds of small boats of 7.5-16.4ft, such as rubber boats, fishing boats, wooden boats, etc. You can use it for fishing on the river, water farming, river rescue, water excursions, flood relief, etc.
• 【Durable Build & Splash Protection】Crafted from aluminum rod and plastisol, the bracket resists corrosion. A water baffle above the three-blade propeller prevents splashes, keeping you dry. Suitable for freshwater/saltwater use, it’s a reliable companion for aquatic adventures.